Table of Contents
Advertisement
b. To install a new storage drive into the bracket, flex the bracket and align pin
4
on the bracket with the corresponding holes in the storage drive. Do not touch the circuit board
on the bottom of the storage drive.
Figure 85. Installing the storage drive into the bracket
c. Slide the new storage drive into the storage drive bay until it snaps into position.
Figure 86. Installing the primary storage drive
d. Connect the signal cable and the power cable to the new storage drive.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 108.
1
, pin
.
Chapter 7
Hardware removal and installation
2
, pin
3
, and pin
5
99
Advertisement
Table of Contents
