Table of Contents
Advertisement
M.2 solid-state drive in the storage drive bracket
To remove or install the M.2 solid-state drive in the storage drive bracket, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 55.
2. To remove the failing M.2 solid-state drive, do the following:
a. Unlock the M.2 solid-state drive carrier with the provided key as shown. Store the key in a secure
place for later use. Press the eject button to eject the carrier from the storage drive bracket. Then,
grasp the M.2 solid-state drive carrier by its edge and gently pull it out of the bracket.
Figure 48. Removing the M.2 solid-state drive carrier
78
P520c User Guide
Advertisement
Table of Contents
