Table of Contents
Advertisement
2-7. Connecting/Disconnecting Flexible
Card Wire
Straight Type
Disconnecting
Pull up the *marked portions of connector, and pull out the
flexible card wire from the connector.
Connecting
Install the flexible card wire as far as it will go, and push
down the *marked portions of connector.
Flexible card wire
*
RCP-730
RCP-731
Angle Type
Disconnecting
Slide the *marked portions of connector in the direction
of the arrows (A), pull up the connector in the dinection of
the arrows (B), and then disconnect the flexible card wire
from the connector.
Conductive
surface
Flexible card wire
*
Connecting
Pull up the *marked portions of the connector, insert the
flexible card wire on its contacting side is faced to the
printed circuit board, and insert it as far as it will go.
Push down the *marked portions, then slide it in the
direction of the arrow (C) to lock.
n
1. Do not insert the flexible card wire on a slant.
2. Do not short the terminals of the flexible card wire.
2-7. Connecting/Disconnecting Flexible Card Wire
B
*
A
Conductive
surface
*
C
*
B
A
*
2-9 (E)
Advertisement
Table of Contents
