Table of Contents
Advertisement
Installation of D-Control panel Assembly
4. Install the four screws to install the D-Control panel
assembly from two rack brackets.
5
Insert the bearings and IRIS gage into the shaft in the
order of bearing, IRIS gage and other bearing .
Install the IRIS gage while pushing the friction lever at
the back of the panel in the direction of the arrow
using a screwdriver.
6. Fix the IRIS Knob with the setscrew.
RCP-730
RCP-731
Friction lever
Driver
2-5. Replacement of D-Control panel Assembly (RCP-731)
IRIS Knob
Setscrew
3 x 3
Bearing
IRIS gage
Bearing
2-7 (E)
Advertisement
Table of Contents
