Replacement Of D-Control Panel Assembly (Rcp-731) - Sony RCP-730 Maintenance Manual

2-5. Replacement of D-Control panel Assembly (RCP-731)

2-5. Replacement of D-Control panel
Assembly (RCP-731)
Removal of D-Control panel Assembly
1. Remove the four knobs.
2. Remove the screw to remove the IRIS knob, bearing
and IRIS gage.
n
A very small projection on the shaft is sometimes caused
by securing the knob to the shaft with the setscrew at the
factory. This projection may interfere with removing the
bearing . In this case, smooth the shaft surface using pliers
or similar item before removing.
3. Remove the four screws to remove the two rack
brackets and D-Control panel assembly.
IRIS Knob
Bearing
Iris
gage
Bearing
Rack bracket
+B3 x 5
2-6 (E)
Set screw
3 x 3
Knob
Shaft iris
control
Knobs
Rack bracket
D-Control panel
assembly
+B3 x 5
RCP-730
RCP-731