Installation - Prem-I-Air EH1434 Manual

IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.

INSTALLATION

For free-standing use: attach the feet to the underneath of
the heater using the four 12 mm (½") screws. The feet at
end of the case.
To wall-mount: Referring to the diagram opposite, draw two
horizontal lines on the wall 305 mm (12") apart, the lower line
more than 50 mm (2") from the floor.
• On the upper line, drill holes 208 mm (8¼") from the centre
line, using a 6mm (¼") masonry bit, and insert a wall plug.
• On the lower line, drill holes 254 mm (10") from the centre
line using a 6mm (¼") masonry bit, and insert a wall-plug.
• Fix the two hook-brackets to the upper holes using the 30
mm (1¼") screws.
• Fix the two L-shaped brackets to the underside of the
heater using the 12 mm (½") screws through the round hole
in the bracket - the oval hole in the bracket locates over the
screw that fixes the case together,
• Hang the heater on the hook-brackets using the two slots.
• The L-shaped brackets will now line up with the lower holes
in the wall. Attach to the wall using the other two 30 mm
(1¼") screws.
Page 2