Installation - Prem-I-Air EH1896 Manual

INSTALLATION

This product must only be fitted by a competent person and after a site survey has
been conducted to assess the suitability of the structure this product will be fitted
to. This product must be fitted using appropriate fixings to a flat, vertical wall.
Primary fixing point holes must be positioned at a distance of 385mm apart and at
least 1.87m from the floor (the base of the unit must be at least 1.8m from the floor).
385mm
70mm
Unit
1800mm
Secondary fixing point hole must be located centrally and below the unit, to align
with the secondary fixing point bracket.
Secondary Fixing Point
The unit will need to be hung on the primary fixing points first, then mechanically
fixed through the secondary fixing point. The unit must not be operated unless all
fixing points are fully secured.
3