Table of Contents
Advertisement
For free-standing use: attach the feet to the underneath of the heater
using the four 10 mm screws. The feet are placed at the end of the case.
1.
Power 750W
2.
Power 1250W
1&2. Power 2000W
3.
Thermostat
Note: When heaters are turned on for the first time or when they are turned on after
not being used for long period in time it is normal for that the heater may emit some
smell and fumes. This will disappear when the heater has been on for a short while,
if the smell or fumes do not disappear we advise to switch off the heater and contact
a specialist.
Following the above guidelines choose a suitable location for the heater.
Turn the thermostat dial fully in a clockwise direction to the maximum
setting.
2580
ASSEMBLY / INSTALLATION
OPERATION
4
2
1
3
Ver. 3 – 0918
Advertisement
Table of Contents
