Before Use; Installation; Operation - Prem-I-Air EH1442 Manual

IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.

BEFORE USE

You must inspect the appliance including its cable and plug for any
signs of damage. If the product is damaged, DO NOT use it, and
contact your supplier immediately.

INSTALLATION

Attaching the feet and castors.
Turn the appliance upside down and hold it steady.
Slide the foot into the base of the appliance adjacent to the
mains cable entry. A click will be heard when it is correctly
aligned.
Slide the castor and axle assembly into the base of the
appliance at the opposite end. Again, a click will be heard
when it is correctly aligned.
Return the appliance to the upright position.

OPERATION

Plug the mains lead into a 13 Amp mains socket.
If connecting via an extension lead, make sure that the lead
is rated at 13 Amps or more, and that it is fully unwound.
Switch the appliance on at the mains socket.
Turn on the rocker switch at the side of the appliance
adjacent to the mains cable entry.
The display will light briefly.
Press the button to switch the appliance ON.
Page 2