Advertisement
Quick Links
Advertisement
Related Manuals for Prem-I-Air EH1890
Summary of Contents for Prem-I-Air EH1890
- Page 1 EH1890 2kW Convector Heater with 24 Hour Timer...
-
Page 2: Before Use
IMPORTANT INSTALLER AND USERS PLEASE NOTE: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately. -
Page 3: Assembly & Installation
ASSEMBLY / INSTALLATION Attach the feet to the underneath of the heater using the four 10mm screws. The feet are paced at both ends of the case. OPERATION Power = 750W Power = 1250W 1+2 = Power = 2000W Thermostat Note: When heaters are turned on for the first time, or when they are turned on after not being used for a prolonged period of time, it is normal for the heater to emit some smell or fumes. - Page 4 TIMER With the 24-hour timer, you can set the unit to operate continuously, or to operate so it automatically switches the unit on and off at the desired time. To operate the heater in timed mode, the three position switch within the dial should be in the centre position.
-
Page 5: Pat Testing
The amount you are being charged will be shown on your electricity bill. At this cost, the EH1890 will cost £0.29 per hour to run, with the thermostat set to maximum. If the thermostat is used to regulate the temperature, the operating costs will be lower, depending on the room temperature and the size of the room. -
Page 6: Disposal And Recycling
Power consumption: SERVICE WARRANTY Prem-I-Air guarantees the product free from defects in materials and workmanship for a period of 1 year. Should this unit be operated under conditions other than those recommended, at voltages other than the voltage indicated on the unit, or any attempts made to service or modify the unit, then the warranty will be rendered void.