Bulk Power Supply LEDs
There is a single, three-color LED located on each bulk power supply.
Figure 5-2
BPS LED Location
Table 5-2
BPS LEDs
LED Indication
Blink Green
BPS in standby state and no faults or warnings
Green
BPS in run state (48 V output enabled) and no faults or warnings
Blink Yellow
BPS in standby or run state and warnings present but no faults
Yellow
BPS in standby state and recoverable faults present but no
non-recoverable faults
Blink Red
BPS state may be unknown, non-recoverable faults present
Red
This LED state is not used
Off
BPS fault or failure, no power cords installed or no power to
chassis
Chapter 5
BPS LED
Description
HP Integrity rx8620 Server LED Indicators
Troubleshooting
109