Figure 4-9. Lan And Rs-232 Connectors On The Core I/O Board - HP Integrity rx8620 User's & Service Manual

Cabling and Power Up
Setting Up the CE Tool (PC)
1. Connect one end of a null modem cable (9-pin to 9-pin) (Part Number 5182-4794) to the Local RS-232
port on the core I/O card (the DB9 connector located at the bottom of the core I/O card).
Figure 4-9 LAN and RS-232 Connectors on the Core I/O Board
Customer Lan
2. Connect the other end of the RS-232 cable to the CE Tool.
86
UPS (Optional) or
Other Serial Device
Modem
Note: The ability to telnet to the MP LAN Port
is available once the MP is configured
via the RS-232 Local Port
Cable Part # 5182-4794
Core I/O Card
RS-232 UPS Port
SYSTEM LAN Port
RS-232 Remote Port
GSP LAN Port
RS-232 Local Port
CE Tool (PC)
RS-232 UPS
System LAN
(Customer LAN)
( Assigned /dev/lan0 )
RS-232 Remote
MP LAN
( Assigned /dev/lan1 )
RS-232 Local
KIN001
5/23/01
Chapter 4