Hot-Plug Power Supply Leds; Hot-Plug Power Supply Leds - HP ProLiant DL580 Setup And Installation Manual

System LEDs and Switches

Hot-Plug Power Supply LEDs

Determine the hot-plug power supply status by noting the color of the LED on the
power supply unit. Use Figure E-4 and Table E-5 to identify the location and status
of each of the LEDs.
Figure E-4: Hot-plug power supply LEDs
Table E-5: Hot-Plug Power Supply LED Combinations
1 Power LED
(green)
Off
Off
Blinking
On
On
E-6
2 Fault LED
Status
(amber)
Off No AC power
On No power to this specific power supply
Or
Power supply failure
Off AC power present
System in standby mode
Off Power supply on and working properly
Blinking Power supply current limit exceeded
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide