Table of Contents
Advertisement
Operation
4. Operation
Control Panel Operation
Button
Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value in to the current function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Protocol Configuration
The COLORado PXL Bar 16 can be set to respond to DMX, Art-Net™, sACN, Kling-Net, or a combination of
these protocols. The protocol configuration must be set for the product to respond correctly to the controller(s).
Control Personalities
The following control personalities are available on the COLORado PXL Bar 16:
Single Control Mode
Basic (20 channels)
Standard (84 channels)
Advanced (154 channels)
Tour (186 channels)
Basic2 (19 channels)
Uses DMX, Art-Net™, or sACN
Single Control
In Single Control mode, the COLORado PXL Bar 16 is controlled by a single protocol input. Choose from
DMX, Art-Net™, or sACN. In this mode, the four personalities available are: Basic (20 channels),
Standard (84 channels), Advanced (154 channels), Tour (186 channels), and Basic2 (19 channels).
Single Control Protocol
To select the Single Control protocol, follow the instructions below:
1. Go to the Address main level.
2. Select Single Control.
3. Choose from the following: DMX, ArtNet, or sACN.
Single Control Personality
To select the Single Control personality, do the following:
1. Set the protocol.
2. Select Personality.
3. Choose from the following: Basic (20 channels), Standard (84 channels), Advanced (154 channels),
Tour (186 channels), or Basic2 (19 channels).
Single Control Start Address
To set the starting address of the Single Control mode, follow the instructions below:
1. Set the protocol.
2. Select Start Address.
3. Set the desired starting address, from 0 to 512.
Single Control Universe
To set the universe address of the Single Control mode when using Art-Net™ or sACN, do the following:
1. Set the protocol.
2. Select Universe.
3. Set the desired universe address, from 0 to 255.
COLORado PXL Bar 16 User Manual Rev. 1
Dual Control Mode Movement
Basic (8 channels)
Standard (20 channels)
Advanced (26 channels)
Basic2 (7 channels)
Uses DMX, Art-Net™, or sACN
Dual Control Mode Pixels
Basic (48 channels)
Standard (64 channels)
Advanced (128 channels)
Uses DMX, Art-Net™, sACN, or
Kling-Net
Page 7 of 40
Advertisement
Table of Contents
