Related Manuals for Chauvet Laser Pointer
Summary of Contents for Chauvet Laser Pointer
- Page 1 LASER LIGHT AVOID DIRECT EYE EXPOSURE User Manual CLASS IIIa LASER PRODUCT CLASSIFIED PER 21 CFR 1040.10 & .11 Complies with US FDA CDRH laser safety standards 21 CFR 1040.10 & 1040.11.
-
Page 2: Contact Information
Document Information The information and specifications contained in this document are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or omissions that may appear in this manual. © Copyright 2011 CHAUVET®. All rights reserved Printed in P.R.C. -
Page 3: Table Of Contents
ABLE OF ONTENTS 1. Before You Begin ... 4 What Is Included ... 4 Unpacking Instructions ... 4 Claims ... 4 Text Conventions ... 4 Icons ... 4 Safety Notes ... 5 Non Interlocked Housing Warning ... 6 Laser Safety Notes ... 6 Laser Safety Labels Reproduction ... -
Page 4: Before You Begin
CHAUVET®. Failure to report damage in a timely manner may invalidate your claim with the carrier. In addition, retain the container and all the packing material for inspection. -
Page 5: Safety Notes
Safety Notes CAUTION! The use of optical instruments with this product will increase eye hazard. Please read the following notes carefully because they include important safety information about the installation, usage, and maintenance of this product. Keep this User Manual for future consultation. If you sell this product to another user, be sure that they also receive this document. -
Page 6: Non Interlocked Housing Warning
Non Interlocked Housing Warning This unit contains high power laser devices internally. Do not open the laser housing, due to potential exposure to unsafe levels of laser radiation. The laser power levels, accessible if the unit is opened, can cause instant blindness, skin burns, and fires. -
Page 7: Laser Safety Labels Reproduction
Laser Safety Labels Reproduction CAUTION – CLASS 3B LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO THE BEAM NON INTERLOCKED HOUSING LABEL Scorpion™ GBC User Manual EXPLANATORY, MANUFACTURER’S ID & CERTIFICATION LABEL LASER APERTURE LABEL LASER HAZARD WARNING LABEL August 2011... -
Page 8: Laser Emission Data
Laser Emission Data LASER EXPOSURE Laser light - Avoid direct eye contact! Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard “For Safe Use of Lasers”, available from the Laser Institute of America: www.laserinstitute.org. -
Page 9: Introduction
2. I NTRODUCTION Product Overview Control Panel DMX Out DMX In Bracket adjustment knob (1 of 2) Power LED Audio LED Scorpion™ GBC User Manual Back Panel Safety Attachment Microphone Sensitivity Microphone Power on/off Fuseholder Power In Power Out Hanging bracket Laser Aperture August 2011... -
Page 10: Product Dimensions
Product Dimensions Scorpion™ GBC User Manual August 2011... -
Page 11: Setup
The power linking diagram shown above corresponds to the North American version of this product ONLY! If using this product in other markets, you must consult with the local CHAUVET® distributor, as power linking connectors and requirements may differ in your country or region. -
Page 12: Fuse Replacement
Fuse Replacement With a flat head screwdriver wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power. Disconnect the power cord before replacing a fuse and always replace with the same type fuse. -
Page 13: Proper Usage
Proper Usage This product is for overhead mounting only. For safety purposes, CHAUVET® recommends mounting your lighting effect products on steady elevated platforms or sturdy overhead supports using suitable hanging clamps. In all cases, you must use safety cables. You can obtain appropriate mounting hardware from your lighting vendor. -
Page 14: Operation
4. O PERATION Control Panel Access control panel functions using the four panel buttons located directly underneath the LED Display. Button Used to access the menu or to return to a <MODE> previous menu option Scrolls through menu options in <UP>... -
Page 15: Dmx Channel Summary
DMX Channel Summary HANNEL UNCTION Control Mode Pattern Selection Color selection Color Changing Speed Zoom X Axis Move (Pan) Y Axis Move (Tilt) Y Axis Roll X Axis Roll Z Axis Rotate Standalone Operation Automatic This product has preprogrammed automatic programs. These are accessed via the LED display on the back panel of the product. -
Page 16: Master/Slave Operation
Master/Slave Operation When operating more than one product in standalone mode, it is possible to link them in a master/slave configuration. This is when one or more slave products will operate identically to the master product. Please see the instructions below for further explanation on how to set a product to slave mode. -
Page 17: Dmx Channel Values
DMX Channel Values HANNEL ALUE 000 017 018 035 036 053 054 071 072 089 090 107 108 125 126 143 144 161 162 179 180 197 198 215 216 ... -
Page 18: Channel 2 Values (Pattern Selection)
Channel 2 Values (Pattern Selection) Value Pattern Value 000~007 064~071 008~015 072~079 016~023 080~087 024~031 088~095 032~039 096~103 040~047 104~111 048~055 112~119 056~063 120~127 Scorpion™ GBC User Manual Pattern Value Pattern 128~135 136~143 144~151 152~159 160~167 168~175 176~181 182~189 Value Pattern 190~197 198~205... -
Page 19: Technical Information
No laser output Bounce mirror motor may have shifted during shipping; readjust If you still have a problem after trying the above solutions, please contact CHAUVET® Technical Support. Scorpion™ GBC User Manual Solution(s) Lights Foggers & Snow ... -
Page 20: Returns Procedure
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET® and request RMA # prior to shipping the product. Be prepared to provide the model number, serial number and a brief description of the cause for the return. -
Page 21: Dmx Primer
DMX Primer There are 512 channels in a DMX connection. Channels may be assigned in any manner. A product capable of receiving DMX will require one or a number of sequential channels. The user must assign a starting address on the product that indicates the first channel reserved in the controller. -
Page 22: Data Cabling
Data Cabling To link products together you must obtain data cables. You can purchase CHAUVET® certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable, use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference. -
Page 23: Product Linking
Product Linking You will need a serial data link to run light shows of one or more products using a DMX controller or to run synchronized shows on two or more products set to a master/slave operating mode. The combined number of channels required by all the products on a serial data link determines the number of products the data link can support. -
Page 24: Technical Specifications
ECHNICAL PECIFICATIONS WEIGHT & DIMENSIONS Length ... 11.3 in (287 mm) Width ... 13.4 in (340 mm) Height ... 9.1 in (230 mm) Weight ... 7.8 lbs (3.5 kg) POWER Auto-ranging power supply ... 100~240 VAC, 50/60 Hz Fuse ... T 1.5 A, 250 V (slow-blow) Power Consumption@ 120 V ...