Table of Contents
Advertisement
@ installation
Firewall or metal support
AcCCessory'5!
Bend the tabs of the
mounting sleeve with
a screwdriver or
simular utensil and
attach it in place.
Phillips truss
head sheet
metal screw
(commercially
available)
Accessoryit:
Accessory: 3:
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip).
1 Refer to the section "Removing the hard rubber frame" and
then remove the hard rubber frame.
2 Align the holes in the unit (two locations on each side) with the
vehicle mounting bracket and secure the unit with the
accessory Screws.
T: Toyota cars
N: Nissan cars
ACAUTION
* Do not use your own screws. Use only the screws provided. If
you use the wrong screws, you could damage the unit.
+ Damage may occur if a screwdriver or similar tool is used with
excessive force during the installations.
Accessory(6)...for Nissan car
Accessory(?)...for Toyota car
17
Advertisement
Table of Contents
