Table of Contents
Advertisement
MAINTENANCE
TROUBLE INDICATIONS
If there is some problem inside the projector, the indicators light up or flash.
Aigol'lo)(=tafeye) tale]
Indicators
=
Symptom and cause
Solutions
ON
LAMP
TEMP
:
of
-
=
The power does not come on.
Unplug the power cord and call the
— Malfunction of the unit.
dealer.
Lit (Red)
x
-
Lit (Red)
Lit (Red)
-
The lamp turns off or does not light up.
* Lamp's life length is over, replace the
lamp with new one.
* Unplug the power cord and call the dealer.
Lit (Red)
-
Lit(Red) | The power turns off or does not come on. | « Place the projector correctly so the
intake and exhaust fans' holes are not
— The inside is too hot, or the projector
covered.
has been working in an area of high
* Turn the projector off, and leave it fora
temperature.
while, and turn it on again.
* Clean the air filter. Bo\,
Lit (Red)
-
Flashing
| The power turns off or does not come on. | Unplug the power cord and call the
(Red)
— Trouble with the intake fan.
dealer.
Lit (Red)
-
Flashing | The power turns off or does not come on. | Unplug the power cord and calll the
(Orange) | — Trouble with the exhaust fan.
dealer.
Lit (Red)
-
Flashing
The air filter cover is taken off.
Attach the cover correctly. BY
(Green)
Before attempting any maintenance, unplug the power cord.
mim 35
Advertisement
Table of Contents
