Toshiba TLP510 Owner's Manual page 35

ABC) — ABC
Explains how to adjust the exposure or switch the level of sensitivity.
Adjusting the Exposure/Set g the Sensitivity
If the projected document is dark, adjust the exposure to "+". If the projected document is too bright, adjust the exposure to "—",
In the darkened projection room, you can get a better view by raising the sensitivity.
MENU Press MENU.
CJ The menu is displayed.
It automatically disappears after about 10
seconds if no button is pressed.
Press <4 /B> to adjust the
+ exposure, and press A.
(a) Bi
SAVE Exit RESET)
(a) Press A/¥ to select nD
" "
oy) CAMERA x : +: OPEN
The adjustment items of camera are listed.
—: CLOSE
v= {SELECT a5: ENTER.
EXIT
rs
(When selecting HI-SENSE.)
Press <4 /B> to select "ON"
7: SELECT ax : ENTER or "OFF", and press A.
oO) Press b-. (OFF30N) ERG SAVE EXIT RESET]
The selecting bar moves t the selecting OFF: Standard on
> items of CAMERA. ON: High
sensitivity
(VIDEO | (GIES
Panel | [ H E S EMEA
Lancia
To exit from menu, press
<4 /® and select "EXIT" and
L press MENU.
The menu disappears.
MENU: * If you select "SAVE", the setting values
are memorized and stored in memory
even after you turn the power off.
CAMERA
2 TSELECT ZF ENTER
Press A/Y¥ to select
adjustment item, and
@
(@) press MENU.
4
IRIS: To adjust the exposure.
HI-SENSE: To set the sensitivity.
* Even if you do not have the settings saved, they are stored until you turn the power off.
* If you select "BACK" and press the MENU button, you will return to the previous menu.
* If you select "RESET" and press the MENU button, the adjustment value returns to default.
* If you select "SAVE" and press the MENU button, it will not only save the current adjusting item's value. It will save all the
adjusting item's value.
When raising the sensitivity some afterimages and noises may be produced.
While the high sensitivity is on, picture from the camera output jack may flickers. 34 ==