Connecting A Macintosh Computet - Toshiba TLP510 Owner's Manual

CONNECTIONS
CONNECTIONS
Connecting an IBM PC or Compatible Computer (DOS/V)
Check -hat the power for the projector and computer are off
before connecting the cables.
Desktop computers
Connect when you want
to view a picture on the
'computer monitor.
Pictures can be imported from connected equipment such as a computer or a video tape player.
Connecting a Macintosh Computer
* Attach the supplied adapter for Macintosh computers.
* Check that the power for the projector and computer are off
before connecting the cables.
Desktop computers
a3
To the
E} audio pon
To MONITOR
ouTPUT.
To AGB INPUT,
Tothe
'Supplied cablo
monitor 207
Not supplied cable
(
1, |__| a
+, Si Spo 505
&e the monitor port
4.' Adapter for Macintosh
To AUDIOIMIC
computers
To the aucio port
To RGB INPUT
'Supplied cable
Not supplied cable
Laptop computers
Laptop computers
To the aucio port
To AUDIOMIC
'Supplied cable
'Not supplied cable
i
4B To the monitor port
\dapter for Macintosh
computers
S550]
a
To AUDIO/NIC
Supplied cable
'Not supplied cable
The projector cannot be connected to a computer that does
not have an analog RGB output terminal. For details, refer to
the computer manual.
You may not be able to connect some computers to the
projector. For details, consult the dealer.
If NTSC/PAL/SECAM signals are input to the RGB INPUT
connector, they cannot be displayed. (Input NTSC/PAL/
SECAM signals to the VIDEO INPUT jacks.)
You may input computer sounds or microphone sounds from
AUDIO/MIC jack. Refer to "MICROPHONE SETTING" BA,
me 73
SER |
The projector cannot be connected to a computer that does
not have an analog RGB output terminal. For details, refer to
the computer manual.
You may not be able to connect some computers to the
projector. For details, consult the dealer.
The adapter for Macintosh computers is conformable to
MULTIPLE SCAN 21.