Trouble Indications; Temp Indicator - Toshiba TLP-511U Owner's Manual

Maintenance

Trouble indications

If there is some problem inside the projector,
the indicators light up or flash.
SELECT/ADJUST
ON/STANDBY MENU ENTER
ON Off or lit (red)
LAMP –
TEMP –
The power does not come on.
Malfunction of the unit.
• Unplug the power cord and call the
dealer.
Downloaded from www.Manualslib.com
The lamp turns off or does not light up.
The lamp's end, or malfunction of the
unit.
ON
ON Indicator
• Lamp's life length is over, replace the
INPUT
LAMP
LAMP Indicator
TEMP

TEMP Indicator

• Unplug the power cord and call the
The power turns off or does not come on.
The inside is too hot, or the projector has
been working in an area of high
temperature.
• Place the projector correctly so the
• Turn the projector off, and leave it for
• Clean the air filter.
manuals search engine
ON Lit (red)
LAMP Lit (red)
TEMP –
42
lamp with new one.
dealer.
ON Lit (red)
LAMP –
TEMP Lit (red)
intake and exhaust fans' holes are not
covered.
a while, and turn it on again.
41
CONTENTS
ON Lit (red)
LAMP –
TEMP Flashing (red)
The power turns off or does not come on.
Trouble with the intake fan.
• Unplug the power cord and call the
dealer.
ON Lit (red)
LAMP –
TEMP Flashing (orange)
The power turns off or does not come on.
Trouble with the exhaust fan.
• Unplug the power cord and call the
dealer.
Note
Before attempting any maintenance, unplug the
power cord.
40