Toshiba TLP510 Owner's Manual page 17

Connect the power cord. ( How to use the foot adjusters
* Insert one end in the AC IN socket on the rear panel.
* Insert the other end in a wall outlet.
The tilt of the projector can be adjusted using the foot
adjusters.
1 Lift the front of the projector and press the
foot adjuster release buttons.
Foot adjuster will stretch.
Release the buttons to lock in position.
Foot adjuster release button
INSTALLATION
Foot adjuster
Side view
To a wall outlet.
| ON indicator (orange) turns on.
| Foot adjuster
2 Turn the foot adjuster to adjust the height.
Turn clockwise to lift up.
Turn counterclockwise to lower.
3 To put the foot adjuster back, hold down the
foot adjuster release buttons and lower the
front slowly.
The foot adjuster will put back.
Foot adjuster release button
* To not pinch your fingers, when pushing the foot adjuster release buttons, always hold both sides of the unit.
* Ifthe screen is exposed to direct sunlight or other strong light, the projected picture becomes too faint to see. Shut out the light
with curtains or other means.
* If the screen and the projector are not installed properly the projected picture may be distorted.
* If the projector is tilted, the picture may be distored. To obtain the best possible picture, place the projector so it faces the
screen squarely.
16 =