Adjustments With Rs-232C - Toshiba TLP510 Owner's Manual

THERS
ADJUSTMENTS WITH RS-232C
Controlling Via the RS-232C Terminal
Conditioning of the Projection Unit can be also be done Pin No. Signal | Meaning
by a ccmputer via the RS-232C, as well as by the remote 7 NG 'No connection
control. 2 XD Receiving data
3 TxD 'Sending data
4 oTR Data terminal ready
5 GND __| Signal ground
G DSR Data set ready
7 RTS Request to send
8 crs Consent to send
9 NC No connection
D-SUB 9 pin
| Interface Format
The interface is established according to the following format.
1 Communication method RS-232C
No parity + DATA + 1 STOP bit
2 Data format Command shall be composed of alphanumeric characters of ASCII
description. Use only capital letters.
3 Speed 9600 bps
4 Communication format STX (02h)|Command (3Byte)|ETX (03h)
One command only can be used in one communication.
5 Return value Acknowledge|ACK (06h)|Not Acknowledge| NAK (15h)
' Command List
(1) NORMAL COMMAND
Command | Original meaning of command | Meaning Command | Original meaning of command | Meaning
Pon PowerON Power ON. [Por PowerOFt Power OFF.
Int INput-1 Agjusts to INPUT-1 (RGB). IN2 INput-2 Adjusts to INPUT2 (VIDEO)
INS INput-3 Adjusts to INPUT-3 (CAMERA).
vu Vol-UP. Volume UP, vow Vol-Down Volume down.
MON MuteON All mute ON. MOF MuteOFt All mute off.
ADN AudioON Audio mute ON. AQF AudioO Ff 'Audio mute OFF.
DON DisplayOn Displaying condition ON DOF DisplayOFt Displaying condition OFF.
FON FreezeON Freezing ON. FOF FreezeOFt Freezing OFF,
RON ResizeON Resizing ON ROF ResizeOFt Resizing OFF.
mae 43