Table of Contents
Advertisement
SETTING OSD (ON SCREEN
DISPLAY) MUTE FUNCTION
With Indication
Without Indication
MUTE
Setting OSD
MUTE
Display the image as explained in "PICTURE PROJECTION" .
|
Press MENU
The menu is display
It automatically disappears after about 10
seconds if no button is pressed.
You can keep the on-screen displays (OSD) off even while switching the input sources ("VIDEO", "RGB") or
losing then ("NO-SIGNAL'), or cutting off the picture and sound ("MUTE").
2 SELECT i: ENTER
Press A/V to select
"OSD MUTE", and press
MENU.
Lie
@ &)
=U SELECT SS: ENTER
"MODE".
The setting items of MODE are listed.
(a)
Press A/V
to select
@)
22 SELECT a: ENTER
Press >.
setting items.
The selecting bar moves to the list of the
SAVE EX!
(VIDEO
PANE
Mic
OFF]
(TeDTEN
«(080 wre OFF|
LANGUAGE | [PROJECT STO|
I SELECT 3 : ENTER,
ing itern's value.
; (4) (b) Press <4 /P to select
"ON" or "OFF", and press
Lt
A.
(OFF ON)
TEN SAVEET_RESET)
a
OFF: not making
2
OSD to Mute.
= =
ON:
making
3
OSD to Mute.
2
(2 SELECT 28: ENTER.
To exit from the menu,
: eo
press <{ /P
to select
and
press
i L
4
"EXIT"
and p
MENU
MENU
The menu disappears.
* If you select "SAVE", the setting values
are memorized and stored in memory
even after you turn the power off.
Even if you do not have the adjustments saved, they are stored until you turn the power off.
If you select "BACK" and press the MENU button, you will return to the previous menu.
If you select "RESET" and press the MENU button, the setting value returns to "OSD MUTE OFF".
If you select "SAVE" and press the MENU button, it will not only save the current adjusting item's value. It will save all the adjust-
30
==
Advertisement
Table of Contents
