Advertisement
_ Disassembly Procedures
M@ Removing the metal cover
1.
=
=
Remove the 2 screws @ fastening the
both sides of the metal cover and 4
screws @ fixing the back of the cover to.
remove the cover.
.
Removing the front panel assembly -
Remove the metal cover.
Remove the screw © and release the 3 _
hooks to remove the assembly.
Uf necessary, disconnect the connectors.)
Removing the DSP circuit board
Removing the 3 fasteners to remove the
_cireuit board. (If necessary, disconnect the
connector.)
Removing the main circuit board
Disconnect the connectors JT101, JT102,
3A2Z91 and JB301.
Remove the 5 screws © to remove the
eireuit board.
Removing the front circuit board
Remove the front panel assembly.
Remove the 7 screws fixng the circuit
board to remove the circuit board.
.
Front CB
Front panel assembly
SE-MXG9BK
(No.20435) 1-13
Advertisement
