Kenwood TS-950SDX Instruction Manual page 42

4-5. SCAN
4-5-1. Memory Scan
To cancel scan press the CLR key.
4-5-2. Group Scan
groups.
Example 1
Group 2
Example 2
Group 1 Group 3
CH10 CH19 CH30 CH39
4-5-3. Memory Channel Lockout
This transceiver has a Memory Channel lockout
function which allows you to temporarily skip
unwanted Memory Channels during memory scan.
Locking out unwanted channels will help to
increase the effective scan speed.
1. Use memory channe! for the RX VFO or the TX
VFO or both during memory channel operations.
The display shows the memory channel operated
last.
42
Note
| Holding the CLR key depressed for longer than
2 seconds will clear that channel all data.
4-5-4. Programmable Band Scan
Channel Selection
4. To cancel scan press the CLR key.
Note
Lower scan limit
10kHz
Upper scan limit
| 30MHz
For example:
When 14.000
MHz
(lower
limit) and 14.010
MHz
(upper limit) are stored
in channel
91, and 21.000
MHz
(lower limit) and 21.010 (upper limit) are stored
in channel 92.