Figure 4-21 Detailed Configuration Of Remoteye® Installation - Toshiba G9400 Series Installation And Operation Manual

RemotEye®
(Provided with RemotEye® 4)
The Cables between RemotEye4 and IOAU-19* PCB/N0031 are included in the RemotEye® 4 package. The cables can
pass through under the panel to mount RemotEye® 4.
The RemotEye® 4 communicates with the UPS via a cable. The connection is described in Figure 4-22 below. Figure 4-23
shows the detail of D-sub 9Pin on N0031.
CAUTION
* Consult Toshiba International Corporation for details on "RemotEye® 4" monitoring software
and its capabilities.
G9400 480V 1200-2000kVA Installation and Operation Manual 203078-001
Comm Cable
CN2
N0031
(CM1)
CN4/CN5
Cables
(Installed)
Figure 4-21 Detailed Configuration of RemotEye® Installation
The UPS must be de-energized when the RemotEye® 4 module is serviced or installed for
safety reason.
Rear side of Bypass Door
(Upper right)
RemotEye® 4
IOAU-19
(IO1)
CN85
PSAU-94
(PSA2)
CN10
CN84
IOAU-19
(IO1)
Bypass Cabinet
35