Oven Components - Blodgett MT2136E/AB Installation Operation & Maintenance

Conveyor Belt --- stainless steel chain link (con-
veyor) belt that carries product through the oven.
Conveyor Belt Master Links --- allow easy remov-
al of the conveyor belt for maintenance and clean-
ing. Identified by locating double spaces between
regular links on belt.
Conveyor Belt Support Assembly (drive & idle
sides) --- located on both ends of oven deck. Drive
side support drives conveyor belt.
Conveyor Belt Tensioners --- maintain tension on
the end of the conveyor belt.
Control Box --- contains electrical wiring, cooling
fan, drive motor and drive chain.
Drive Motor --- provides power to move the con-
veyor belt. Located inside the control box.
Drive Chain --- connects the drive motor sprocket
to the drive side conveyor belt support sprocket.
Located inside the control box.
Control
Box
Remote Oven
Control
Conveyor
Belt Support
Crumb Pan
Integral
Oven Control
Tunnel
Extension
Baking Chamber --- products pass through the
baking chamber on the conveyor belt for cooking.
Nozzles --- distribute heated air to bottom of the
baking chamber. Located inside the oven, under
the conveyor belt.
Crumb Pan --- catches crumbs from products on
the conveyor. Located under conveyor belt at both
ends of the baking chamber.
Pull Down Door --- open for auxiliary product in-
sertion.
Air Flow Plates (2, drive and idle sides) --- dis-
tribute heated air to the top of baking chamber. Lo-
cated inside of oven at the top of baking chamber.
Emergency Shut Down Switch --- on remote con-
trol ovens, allows user to turn oven and conveyor
off in an emergency. Do not use for general shut
down.
Belt
Tensioner
Tunnel
Extension
Trays
Nozzles
Air Flow Plates
Pull Down Door
Figure 2
3
Introduction

Oven Components

Product Stop
Conveyor Belt
Conveyor Belt Support
Crumb Pan
Access Panel
False Front