Installation
Oven Assembly
OVEN SUPPORTS AND CASTERS
Single and Double Stacked Units
1. Bolt the supports to the oven with 3/8-16 hex
head bolts.
NOTE: Install the locking casters on the front
of the oven.
2. Carefully place the oven onto casters. Have
several persons lift the oven off the pallet and
set it onto the casters.
3. Engage the brakes on the front casters.
Single and Double Stacked Legs
Figure 3
Triple Stacked Units
1. Rest the bottom oven on its back.
2. Insert the caster stem through the square
washer and into the threaded hole in the bot-
tom of the unit.
NOTE: Install the locking casters on the front
of the oven.
3. Tighten all casters so the square washer is
aligned with the edges of the oven.
4. Carefully place the oven onto casters. Have
several persons lift the oven off the pallet and
set it onto the casters.
5. Engage the brakes on the front casters.
Triple Stacked Casters
6
Figure 4