Oven Components - Blodgett MT3855G-G Installation, Operation And Maintenance Manual

Folding Conveyor Assembly --- stainless steel
chain link (conveyor) belt and support that carries
product through the oven.
Control Box --- contains electrical wiring, cooling
fan, drive motor and drive chain.
Drive Motor --- provides power to move the con-
veyor belt. Located inside the control box.
Drive Chain --- connects the drive motor sprocket
to the drive side of the conveyor assembly. Lo-
cated inside the control box.
Baking Chamber --- products pass through the
baking chamber on the conveyor belt for cooking.
Nozzles --- distribute heated air to the bottom of
the baking chamber. Located inside the oven, un-
der the conveyor belt.
Nozzle Hold-Down Bracket --- holds the front end
of the nozzles in position. Located inside the oven.
Return Air
Diverters
Upper
End Plug
Control
Box
Lower
End Plug
Crumb
Pan
Return Air Diverters --- divert return air from bak-
ing chamber back to the combustion chamber.
Ensure even baking throughout oven. Located in-
side the oven, beneath the nozzles.
End Plugs --- keep heat in the baking chamber.
Located on each end above and below the con-
veyor belt.
Crumb Pan --- catches crumbs from products on
the conveyor. Located under conveyor belt at both
ends of the baking chamber.
Pull Down Door --- open for auxiliary product in-
sertion.
Air Flow Plates (2, drive and idle sides) --- dis-
tribute heated air to top of baking chamber. Lo-
cated inside of oven at the top of baking chamber.
Emergency Shut Down Switch --- allows user to
turn oven and conveyor off in an emergency. Do
not use for general shut down.
Folding Conveyor
Remote
Computer
Control
Air Flow
Plate
Figure 2
3
Introduction

Oven Components

Assembly
Product Stop
Handle for
Pull Down Door
Nozzles