Oven Components - Blodgett MT3255G Installation Operating & Maintenance Manual

Conveyor Belt --- stainless steel chain link (con-
veyor) belt that carries product through the oven.
Conveyor Belt Master Links --- allow easy remov-
al of the conveyor belt for maintenance and clean-
ing. Identified by locating double spaces between
regular links on belt.
Conveyor Belt Support Assembly (drive & idle
sides) --- located on both ends of oven deck. Drive
side support drives conveyor belt.
Control Box --- contains electrical wiring, cooling
fan, drive motor and drive chain.
Drive Motor --- provides power to move the con-
veyor belt.
Drive Chain --- connects the drive motor sprocket
to the drive side conveyor belt support sprocket.
Baking Chamber --- products pass through the
baking chamber on the conveyor belt for cooking.
Nozzles --- distribute heated air to the bottom of
the baking chamber. Located inside the oven, un-
der the conveyor belt.
Upper
End Plug
Lower
End Plug
Crumb
Pan
Control
Box
Air Flow
Plate
Return Air
Diverter
Figure 2
Introduction
Nozzle Hold-Down Bracket --- holds the front end
of the nozzles in position. Located inside the oven.
Return Air Diverters (2, drive and idle sides) ---
diverts return air from the baking chamber back to
the combustion chamber. Ensures even baking
throughout oven. Located inside the oven, be-
neath the nozzles.
Upper End Plug --- keeps heat in the baking
chamber. Located on each end above the convey-
or belt.
Lower End Plug --- helps keep heat in the baking
chamber. Located at each end below the convey-
or belt.
Crumb Pan --- catches crumbs from products on
the conveyor. Located under conveyor belt at both
ends of the baking chamber.
Pull Down Door --- open for auxiliary product in-
sertion.
Air Flow Plates (2, drive and idle sides) --- dis-
tribute heated air to top of baking chamber. Lo-
cated inside of oven at the top of baking chamber.
Conveyor Support
Assembly
Handle for
Pull Down Door
Conveyor
Support
Assembly
3

Oven Components

Conveyor Belt
Nozzles