Specific Safety Instructions - ULTIMATE SPEED USWB 11 A2 Operation And Safety Notes

Do not hold plugs under water or immerse in water.
„
When the charging system is connected, do not clean the vehicle
„
with a high-pressure cleaner or wash it as the plug connection is
not resistant to pressurised water.
z Specific safety instructions
Before operation, the device carries out an automatic self test and
„
checks internal components, possible residual currents, over or
under voltage and temperature.
A charging process is then only possible if all test criteria have
been met.
The product must be installed in its final location.
„
If the device is fitted to an openly accessible post, it is advisable
„
that you fit an additional protection round the post too.
Do not use an adapter plug or extension cable.
„
The electrical system which is provided for charging electric cars
„
must be checked by an electrician before use.
Only use the device in an ambient temperature between -25 °C
„
and 50 °C.
Although the EV charger
„
conditions, we recommend that it is protected from direct sunlight
or extreme weather conditions.
Only use the EV charger
„
level.
A slightly higher temperature during charging is absolutely normal
„
and not a malfunction.
Protect the EV charger
„
including fires.
Store the EV charger
„
moisture and corrosion.
Do not use the product in the vicinity of strong electromagnetic
„
fields or in the immediate vicinity of mobile telephones.
Do not drop the EV charger
„
The EV charger
„
(in accordance with EN 62196-2).
When using the EV charger
„
is firmly in place.
8
is designed for standard weather
1
up to height of 2000 m above sea
1
from moisture and high temperatures,
1
in a dry place and protect the device from
1
.
1
is designed for electric cars with a type 2 plug
1
make sure that the connection plug
1
GB/IE/NI/CY/MT
11