Energy zeroCO2 XL Operation Manual page 57

15. STATUS. Report battery module status:
green=operating, red=failure or protection.
16. SOC. Indicates the battery charge level. Each LED corresponds to 25% charge.
Battery
status
off
sleep
idle
in charge
discharge
failure
Tab. 5.2 - Status and charge level Led
Nota: led fl ashing levels description.
L2=0.5" on and 0.5" off, L4=1" on and 1" off.
58 - Installation
status
charge level
Mode LED
• •
off off off off off off all off
normal L2 off off off off off Power Saving Mode
normal off off off off off Power Saving Mode
alarm off off off off off high or low battery voltage or temperature
protec. off off off off off excessive battery voltage or temperature
normal off highest capacity
indicator LED
alarm off
fl ashes (L2)
protec. off off off off off Charge blocked
normal L2 off
alarm off L2 charge LED is on
protec. off
startup
off L4 off off off off
failure
other
off off off off off
failure
STL
off L2
failure
Description
Battery charging. The blinking LED indicates
the current charge level
LEDs indicate current charge level
Discharge blocked
charge/discharge lock
L2 MCU self-diagnosis failure