Energy zeroCO2 XL Operation Manual page 3

This manual introduces the Energy zeroCO XL.
2
zeroCO XL is a large storage solution applicable to commercial, industrial and
2
utility scale plants, both new construction and as a retrofi t for existing plants. It can
also manage entire energy communities.
The solution involves connecting an AC power source to 60 kW power converters
that can be scaled in a modular way to higher powers to manage the charging and
discharging phases of individual battery strings of
125 kWh, and parallelizable in turn obtaining storage of over 1 MWh, acting as a
diaphragm between the instantaneous load curve and the availability of the energy
source, two trends that for renewable sources are diffi cult to coincide.
Requiring an alternating current source as input, zeroCO XL is compatible with
2
photovoltaic inverters, wind turbines and renewable or non-renewable electricity
generators.
The EMS on-board computer allows you to implement management logics
customized for the type of application: increase in self-consumption, peak shaving,
feeding energy into the grid in a controlled way following the daily energy price
curves in the electricity market.
Read this manual before installing your system and follow the instructions carefully
during the installation process.
If in doubt, contact the supplier immediately for advice and clarifi cation.
Commissioning: the start-up of the system is to be carried out strictly by Energy
S.p.A. personnel and can take place on site or remotely, subject to commercial
agreements stipulated during the order.
Upon receipt of goods, contact Energy S.p.A. support. to agree on commissioning.