Troubleshooting - Hoover H-OVEN 500 HOC5S3478WFS User Instructions

Waste management and environmental protection
This appliance is labelled in
accordance with European
Directive
regarding
electronic appliances (WEEE).
The
polluting substances (that can
have a negative effect on the environment)
and base elements (that can be reused). It is
important that the WEEE undergo specific
treatments to correctly remove and dispose
of the pollutants and recover all the materials.
Individuals can play an important role in
ensuring that the WEEE do not become an
environmental problem; it is essential to follow
a few basic rules:
- the WEEE should not be treated as domestic
waste;
- the WEEE should be taken to dedicated
collection areas managed by the town council
or a registered company.
In many countries, domestic collections may
be available for large WEEEs. When you buy a
new appliance, the old one can be returned to
the vendor who must accept it free of charge
as a one-off, as long as the appliance is of an
equivalent type and has the same functions as
the purchased appliance.

Troubleshooting

Problem
the oven does not heat
up
The oven does not
heat up
No reaction of the
touch user interface
2012/19/EU
electric
WEEE contain both
Possible cause
The clock is not set
A cooking function and temperature has
not been set
Steam and condensation on the user in-
terface panel
SAVING
ENVIRONMENT
Where possible, avoid pre-heating the oven
and and always try to fill it. Open the oven door as
infrequently as possible, because heat from
the cavity disperses every time it is opened.
For a significant energy saving, switch off the
oven between 5 and 10 minutes before the
planned end of the cooking time, and use
the residual heat that the oven continues to
generate. Keep the seals clean and in order, to
avoid any heat dispersal outside of the cavity.
If you have an electric contract with an hourly
tariff, the "delayed cooking" programme
makes energy saving more simple, moving the
cooking process to start at the reduced tariff
time slot.
EN 20
AND RESPECTING
Solution
Set the clock
Ensure that the necessary settings
are correct
Clean with a microfiber cloth the
user interface panel to remove the
condensation layer
THE