Related Manuals for Hoover H-OVEN 300 H-OVEN 300
Summary of Contents for Hoover H-OVEN 300 H-OVEN 300
- Page 1 USER INSTRUCTION OVENS Candy Hoover Group S.R.L. • Via Comolli 16 • 20861 Brugherio (MB) Italy...
- Page 2 Safety Indications • During cooking, moisture may condense inside the oven cavity or on the glass of the door. This is a normal condition. To reduce this effect, wait 10-15 minutes after turning on the power before putting food inside the oven. ln any case, the condensation disappears when the oven reaches the cooking temperature.
- Page 3 • Only use the meat probe recommended for this oven. • Do not use a steam cleaner for cleaning operations. • Connect a plug to the supply cable that is able to bear the voltage, current and load indicated on the tag and having the earth contact. The socket must be suitable for the load indicated on the tag and must have ground contact connected and in operation.
- Page 4 cause a malfunction of the monitor. ln this case contact customer service. • The appliance must not be installed behind a decorative door in order to avoid overheating. • When you place the shelf inside, make sure that the stop is directed upwards and in the back of the cavity.
-
Page 5: Table Of Contents
Summary General Instructions 1.1 Safety indications 1.2 Electrical safety 1.3 Recommendations 1.4 Installation 1.5 Waste management 1.6 Conformity declaration 2.1 Overview Product Description 2.2 Accessories 2.3 First use Use of the Oven 3.1 Display description 3.2 Cooking modes Oven Cleaning and Maintenance 4.1 General notes on cleaning 4.2 Maintenance •... -
Page 6: General Instructions 1.1 Safety Indications
1. General Instructions We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. -
Page 7: Recommendations
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituted by technical service staff or by technicians with equivalent qualifications. -
Page 8: Product Description 2.1 Overview
2. Product Description 2.1 Overview 1. Control panel 2. Shelf positions (lateral wire grid if included) 3. Metal grill 4. Drip pan 5. Fan (behind the steel plate) 6. Oven door 2.2 Accessories Metal grill Lateral wire grids Holds baking trays and plates. It located at both sides of the oven cavity. -
Page 9: First Use
2.3 First Use PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering smells of newness. - Page 10 HOW TO SWITCH WHAT IT IS FOR FUNCTION HOW TO ACTIVATE WHAT IT DOES IT OFF • Child Lock function is • Child Lock function is deactivated by touching activated by touching touchpad Set (+) again Set (+) for a minimum of for a minimum of 5 5 seconds.
-
Page 11: Cooking Modes
3.2 Cooking Modes T °C T °C Function Function (Depends on the oven model) range Suggested Dial LAMP: Turns on the oven light. DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered. -
Page 12: Oven Cleaning And Maintenance
4. Oven cleaning and maintenance 4.1 General notes on cleaning The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for cleaning, so as to not irreparably damage the enamelled parts. -
Page 13: Removal And Cleaning Of The Glass Door
REMOVAL AND CLEANING OF THE GLASS DOOR 1. Open the oven door. 2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards. 5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)). -
Page 14: Changing The Bulb
CHANGING THE BULB 1. Disconnect the oven from the mains supply. 2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type. 3. Once the defective bulb is replaced, replace the glass cover. 4.3 Hydro easy clean function (according to model) The HYDRO EASY CLEAN procedure uses steam to help remove remaining fat and food particles from the... -
Page 15: Installation 6.1 For Equepped With Fixing Squares
6 Installation EN 15... - Page 16 6.1 For Equepped With Fixing Squares B: 720 OVEN FITTED BETWEEN FURNITURES B: 720 EN 16...
- Page 17 INSTALLATION A: 875 - 878 B: 705 - 708 550 min. A: 885 B: 720 The manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors contained in this brochure. We reserve the right to carry out modifications to products as required, including the interests of consumption, without prejudice to the characteristics relating to safety or function.