Changing The Bulb; Hydro Easy Clean Function; Troubleshooting; Faq - Hoover H-OVEN 300 H-OVEN 300 User Instruction

CHANGING THE BULB

1. Disconnect the oven from the mains supply.
2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.
3. Once the defective bulb is replaced, replace the glass cover.

4.3 Hydro easy clean function

The HYDRO EASY CLEAN procedure uses steam to help remove remaining fat and food particles from the
oven.
1. Pour 300 ml of water into the HYDRO EASY CLEAN container at the bottom of the oven.
2. Set the oven function to Static (
)heater
3. Activate HYDRO EASY CLEAN mode by setting
the temperature on 100°C or icon (
4. Allow the program to operate for 30 minutes.
5. After 30 minutes switch off the program and
allow the oven to cool down.
6. When the appliance is cool, clean the inner
surfaces of the oven with a cloth.
Warning
Make sure that the appliance is cool before you
touch it.
Care must be taken with all hot surfaces as there
is a risk of burns.
Use distilled or drinkable water.

5. Troubleshooting

5.1 FAQ

PROBLEM
The oven does not heat up
The oven does not heat up
The oven does not heat up
(according to model)
)or Bottom (
)
POSSIBLE CAUSE
The clock is not set
The child lock is on
A cooking function and
temperature has not been set
EN 14
SOLUTION
Set the clock
Deactivate the child lock
Ensure that the necessary
settings are correct