Hoover H-OVEN 500 HOC5S3478WFS User Instructions page 5

suitably qualified professional considering the polarity of the
oven and of the power source.
The disconnection must be achieved incorporating a switch in
the fixed wiring in accordance with the wiring rules
• IF THE OVEN IS PROVI ED BY THE MANUFACTURER WITH
PLUG:
The socket must be suitable for the load indicated on the tag
and must have ground contact connected and in operation.
The earth conductor is yellow-green in colour. This operation
should be carried out by a suitably qualified professional. ln case
of incompatibility between the socket and the appliance plug,
ask a qualified electrician to substitute the socket with another
suitable type. The plug and the socket must be conformed to
the current norms of the installation country. Connection to
the power source can also be made by placing an omnipolar
breaker, with contact separation compliant to the requirements
for overvoltage category III, between the appliance and the
power source that can bear the maximum connected load and
that is in line with current legislation. The yellow-green earth
cable should not be interrupted by the breaker. The socket or
omnipolar breaker used for the connection should be easily
accessible when the appliance is installed.
The disconnection may be achieved by having the plug
accessible or by incorporating a switch in the fixed wiring in
accordance with the wiring rules.
• lf the power cable is damaged, it should be substituted with
a cable or special bundle available from the manufacturer or
by contacting the customer service department. The type
of power cable must be H05V2V2-F. This operation should
be carried out by a suitably qualified professional. The earth
conductor (yellow-green) must be approximately 10 mm longer
than the other conductors. For any repairs, refer only to the
Customer Care Department and request the use of original
spare parts.
EN 5