Empty Key; Configuring An Empty Key Using The Mitel Web Ui - Mitel 6873i User Manual

CONFIGURING SOFTKEYS
or
Select from Key 1 through Key 30 on the Bottom keys.
In the Type field, select Call History.
3.
In the Label field, enter a label to display on the phone for the key (default is "Call History").
4.
Click Save Settings.
5.
Expansion Module Keys
Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
6.
In the Type field, select Call History.
7.
In the Label field, enter a label to display on the phone for the key (default is "Call History").
8.
Click Save Settings.
9.

EMPTY KEY

You can set a softkey to force a blank entry on the IP phone display for a specific key. You do this by
setting the softkey to Empty. The keys are added in order (from key 1 to Key 30 [bottom] or Key 48 [top])
after any hard-coded keys have been added. If a particular key is not defined, it is ignored.

CONFIGURING AN EMPTY KEY USING THE MITEL WEB UI

Click on Operation > Softkeys and XML.
1.
or
Click on Operation > Expansion Module <N>.
Softkeys
Select from Key 1 through Key 48 on the Top keys.
2.
or
Select from Key 1 through Key 30 on the Bottom keys.
In the Type field, select Empty.
3.
In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
4.
Expansion Module Keys
Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
5.
In the Type field, select Empty.
6.
Click Save Settings.
7.
EMPTY KEY
120