Table of Contents
Advertisement
SUPERCONSOLE 1000
Adjusting the Ringer Volume
To raise or lower the ringer volume while the console is ringing:
1. Press and release the Volume
to decrease the volume.
2. Repeat until the ringing is at the volume you want.
Adjusting the Handset and Headset Receiver Volume
The Volume keys adjust the volume of the console ringer and the volume
of the handset and headset receiver. Although you can have a handset
and a headset connected to the console at the same time, the receiver
volume for each is not individually adjustable; any volume adjustments you
make affect both the handset and the headset.
To adjust the handset and headset receiver volume while a call is in
progress and the console is not ringing, or while the console is idle:
∧
•
Press
repeatedly to increase the volume or
!
Warning: Because continuous exposure to loud sounds can
contribute to hearing loss, keep the volume at a moderate level.
Turning the Console Bell (Ringer) Off/On
When the bell is off, a flashing Answer key and the C/W indicator on the
display are the only indications that calls are waiting to be answered.
To turn the bell on or off:
1. Press Function.
2. Press [B
O
ELL
Switching to Night/Day Service
Incoming calls that normally ring the console during the day can ring
another answering point at night. Your system may have one or two night
service modes called Night 1 and Night 2. The mode you should select
depends on system programming.
16
User Guide
®
∧
] or [B
O
].
FF
ELL
N
key to increase or the Volume
∨
to decrease it.
∧
key
Hide quick links:
Advertisement
Table of Contents
