Answering An Incoming Call Using A Headset; Switching To A Headset While On A Call; Volume Controls; Adjusting The Ringer Volume - Mitel 6392 Quick Start Manual

Answering an incoming call using a headset

To answer an incoming call using a headset, press the
Note: If you subscribe to a Caller ID service, caller information will be sent from the telephone
service provider to your 6392 between the first and second ring. Therefore, if you want the number
of the incoming call to appear on the display and in the Callers List, you must wait until the Caller
ID information appears on the display before answering the phone.

Switching to a headset while on a call

When on an active call using the handset, press the
up the handset.
When on an active call using the speakerphone, press the

Volume controls

You can adjust the volume of the ringer, handset, speakerphone, and headset by pressing the left
or right side of the

Adjusting the ringer volume

While the phone is ringing, press the left or right side of the
the ringer volume for the applicable line in use.
When the phone is idle, pressing the
Line1 or Line2 to select the line to which you want to apply the changes and press the left or right
side of the

Adjusting the handset volume

Lift the handset off hook, press the left or right side of the
the handset volume.
Note: To prevent hearing-related injuries, when you set the handset volume to its maximum level,
after placing the handset back on hook, the phone will automatically reset the handset volume to
its default level.

Adjusting the speakerphone volume

Press the
the left or right side of the

Adjusting the headset volume

Press the
the headset volume.
key.
key to increase or decrease the ringer volume for the selected line.
key (press the key twice if a headset is attached to the phone) and press
key to increase or decrease the speakerphone volume.
key and press the left or right side of the
Making and receiving calls
key when the phone rings.
key to switch to the headset and hang
key to switch to the headset.
key to increase or decrease
key displays a line selection screen. Press the
key to increase or decrease
key to increase or decrease
11