Making A Call Using A Headset; Answering An Incoming Call Using A Headset; Switching To A Headset While On A Call; Volume Controls - Mitel 6390 Quick Start Manual

6930 Analog Phone Quick Start Guide

Making a call using a headset

Making a regular call
1. Press the
2. At the dial tone, enter the number you wish to call using the dialpad.
Pre-dialing a number
Note: Pre-dialing is only available if the Live Dialpad feature is disabled. Live dialpad can be
disabled through the Live dialpad option in the Options List.
1. Enter the number you wish to call using the dialpad.
2. Press the

Answering an incoming call using a headset

To answer an incoming call using a headset, press the
Note: If you subscribe to a Caller ID service, caller information will be sent from the telephone
service provider to your 6390 between the first and second ring. Therefore, if you want the number
of the incoming call to appear on the display and in the Callers List, you must wait until the Caller
ID information appears on the display before answering the phone.

Switching to a headset while on a call

When on an active call using the handset, press the
up the handset.
When on an active call using the speakerphone, press the

Volume controls

You can adjust the volume of the ringer, handset, speakerphone, and headset by pressing the left
or right side of the

Adjusting the ringer volume

While the phone is idle or ringing, press the left or right side of the
decrease the ringer volume.

Adjusting the handset volume

Lift the handset off hook, press the left or right side of the
the handset volume.
Note: To prevent hearing-related injuries, when you set the handset volume to its maximum level,
after placing the handset back on hook, the phone will automatically reset the handset volume to
its default level.
8
key.
key or press the Dial softkey.
key.
key when the phone rings.
key to switch to the headset and hang
key to switch to the headset.
key to increase or
key to increase or decrease