Auxiliary Switches - If Equipped - Jeep GLADIATOR 2023 Owner's Manual

Table of Contents

Advertisement

A
S
— I
UXILIARY
WITCHES
F
Four auxiliary switches are located in the lower switch
bank of the instrument panel and can be used to power
various electrical devices.
The functionality of the auxiliary switches can be changed
via the Uconnect Settings. All switches can be configured
for setting the switch type operation to latching or
momentary, power source of either battery or ignition, and
ability to hold last state across key cycles.
Auxiliary Switches
E
NOTE:
QUIPPED
Holding last state conditions are met when switch type is
set to latching and power source is set to ignition within
Uconnect Settings
The auxiliary switches manage the relays that power four
blunt cut wires. These wires are located under the
instrument panel in the passenger compartment and
under the hood to the right, near the battery.
Auxiliary Switch Connections — Under Hood
page 199.
Ú
GETTING TO KNOW YOUR VEHICLE
Auxiliary Switch Connections – Under Instrument Panel
In addition to the four auxiliary switch wires, a fused
battery wire and ignition wire are also located in the
interior, on the passenger side under the instrument
panel.
A kit of splices and heat shrink tubing are provided with
the auxiliary switches to aid in the connection/installation
of your electrical devices.
73
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents