Jeep GLADIATOR 2023 Owner's Manual page 82

Table of Contents

Advertisement

80
GETTING TO KNOW YOUR VEHICLE
Lowering The Soft Top Into The Sunrider® Position:
Use this QR code to access your digital
experience.
1.
Fold both sun visors forward
against the windshield.
2.
Release the header latches from
the crossbar by pulling the handle
downward. Make sure the hook is
fully disengaged from its receiver.
Step Two
3.
From both the left and right sides, lift up on the #1
Bow of the soft top to begin the operation. It is
recommended to utilize two people for this
procedure.
Step Three
4.
Move to the side of the vehicle and use the side link
to fold the soft top rearward.
Step Four
5.
Secure the top in this position by using the two
hook-and-loop fasteners provided in the center
console.
Step Five
NOTE:
The vehicle can be driven in the Sunrider® Position with
the rear window and quarter panel cover assemblies fully
installed or completely removed.
CAUTION!
Quarter panel cover assemblies and rear window must
be either all in or all out.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents