4.1 Installation
Internet
1
Adjust the switch to Router mode. See 1.4.1 Setting the Operating Mode on
page 10.
2
Connect one end of the RJ-45 Ethernet cable to the travel router and the other
end to the broadband router.
3
Turn on or plug in the DSL / cable modem and the broadband router.
4
Connect the power adapter to the travel router and plug to an outlet or power
strip. Wait for the travel router to boot.
5
Check the LED indicators to verify
connection.
6
Enable the wireless function of the
wireless clients or devices.
Note:
Make sure you remove the power source from the travel router first before adjusting the mode
switch.
Wireless Travel Router
Wireless Travel Router
Network Diagram
ADSL /
Cable Modem
4. ROUTER MODE
Wireless Station
Mobile PDA
The following LED
indicators should be lit...
√
Power LED (solid)
√
LAN LED (solid)
√
WLAN LED (flashing green)