Pptp - TRENDnet TEW-654TR User Manual

4. ROUTER MODE
MAC Address
Enter the MAC address of the computer that was last connected to a modem. To
enter the MAC address of your current computer, click Clone MAC Address.
Once configuration is complete, click Apply to save and apply settings, or click
Cancel to cancel changes. The travel router will restart for new settings to take effect.

PPTP

Select PPTP (Point to Point Tunneling Protocol) if your ISP uses a PPTP connection.
Your ISP will provided you with a user name and password.
Address Mode
Select Dynamic IP (default) or Static
IP if your ISP provided you with the IP
address, subnet mask, and DNS server
addresses.
IP Address
Enter the IP address provided by your
ISP. This field is available only when
Access Mode is set to Static IP.
Subnet Mask
Enter the subnet mask provided by your
ISP. This field is available only when
Access Mode is set to Static IP.
Gateway
Enter the gateway provided by your ISP.
This field is available only when Access
Mode is set to Static IP.
Server IP
Enter the server IP address provided by your ISP.
PPTP Account
Enter the PPTP account name provided by your ISP.
PPTP Password
Enter the PPTP password provided by your ISP.
Primary / Secondary DNS
Enter the DNS server addresses provided by your ISP.
Auto-reconnect
Select reconnect option: Always-on, Connect-on Demand, and Manual .
Idle Time Out
Enter the time wherein the travel router will cut off the Internet connection after the
specified period of inactivity (in minutes). This field is disabled when Auto-reconnect
 
Wireless Travel Router Wireless Travel Router