Installation; Wireless Performance Considerations - TRENDnet TEW-751DR User Manual

TRENDnet User's Guide
Front Panel View
•
WPS LED – This indicator is turned on and blinks when WPS is
activated. The LED will turn off automatically once WPS is completed.
•
Wireless LAN LED – This indicator lights on when the link is established.
The indicator blinks when there is data transmission.
© Copyright 2013 TRENDnet. All Rights Reserved.
•
•
•

Installation

Placement of the router is very important. Do not place the router in an enclosed
area such as a closet, cabinet, or in the attic or garage.

Wireless Performance Considerations

The wireless router allows you to access your network using a wireless
WPS LED
connection from virtually anywhere within the operating range of your wireless
network. However, the number, thickness and location of walls, ceilings, or other
Wireless LAN LED
objects that the wireless signals must pass through, may limit the range. Typical
ranges vary depending on the types of materials and background RF (radio
frequency) noise in your home or business. The key to maximizing wireless
range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the router and other
LAN LEDs
2. Be aware of the direct line between network devices. A wall that is 1.5
WAN LED
Power LED
3. Building Materials make a difference. A solid metal door or aluminum
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such
LAN LEDs – This indicator lights when there is a connection on the port.
WAN LED – This indicator lights green when the WAN port is physically
connected to the modem Network port.
Power LED - This indicator lights on when the router is powered on.
network devices to a minimum - each wall or ceiling can reduce your
adapter's range from 3-90 feet (1-30 meters.) Position your devices so
that the number of walls or ceilings is minimized.
feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet
(1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)
thick! Position devices so that the signal will travel straight through a wall
or ceiling (instead of at an angle) for better reception.
studs may have a negative effect on range. Try to position access points,
wireless routers, and computers so that the signal passes through
drywall or open doorways. Materials and objects such as glass, steel,
metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick,
and concrete will degrade your wireless signal.
devices or appliances that generate RF noise.
as ceiling fans, lights, and home security systems), your wireless
connection may degrade dramatically or drop completely. Make sure
your 2.4GHz phone base is as far away from your wireless devices as
possible. The base transmits a signal even if the phone in not in use.
TEW­751DR
5