1. PRODUCT OVERVIEW
1.5.3 Connecting the Ethernet Cable
Use the Ethernet (RJ-45) cable to connect to a computer for wired connection or
connect to a DSL or cable modem for internet connection.
1
Connect one end of the Ethernet cable to your computer or a DSL or cable
modem.
2
Plug the other end to the LAN port of the travel router.
DSL / Cable modem connection
1.6 System Requirements
•
Operating systems: Windows XP, Vista
•
Microsoft Internet Explorer 5.5 or higher
•
At least one RJ-45 Ethernet network
1.6.1 Configuring Connections
To properly detect the connections, configure your computer's network settings first.
The following instructions are based on Windows XP. Non-Windows XP users will
see similar screens.
1
For Windows XP, click Start > Control Panel > Network Connections. Right
click on a connection, then select Properties.
2
Highlight Internet Protocol
(TCP/IP), then click
Properties.
3
Click Obtain an IP address
automatically and Obtain
DNS server address
automatically.
4
Click OK and OK again.
1
1
Wired computer connection
Wireless Travel Router
Wireless Travel Router