1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Router
  5. TEW-659BRV
  6. User manual

TRENDnet TEW-659BRV User Manual

300mbps wireless n vpn router
Hide thumbs Also See for TEW-659BRV:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Troubleshooting Manual
Cover Page
TRENDnet User's Guide

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TEW-659BRV

Summary of Contents for TRENDnet TEW-659BRV

  • Page 1 Cover Page TRENDnet User’s Guide...

  • Page 2: Table Of Contents

    IPsec (Internet Protocol Security) ................27 Enable/disable DoS (Denial of Service) Prevention ............. 58 Site-to-Site VPN ....................... 27 Allow/deny ping requests to your router from the Internet ........58 Client-Server VPN (Server Mode) ................31 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 3 Check the router status information ................73 View your router log ....................75 Configure your router log .................... 76 Enable SNMP on your router ..................78 Router Management Page Structure ..........79 Technical Specifications..............80 Troubleshooting ................81 © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 4: Product Overview

    Product Overview Features The 300Mbps Wireless N VPN Router, model TEW-659BRV, provides the ability to define up to 80 Virtual Private Network (VPN) tunnels*, all while generating a high speed wireless network. IPSec, L2TP, and PPTP VPN pass-through sessions are supported and a configurable firewall ensures the highest level of security.

  • Page 5: Product Hardware Features

    On/Off Power Switch – Push your router On/Off push button power switch to turn your router “On” (Inner position) or “Off” (Outer position). • Antennas – The antennas broadcasts wireless signals to allow your wireless clients and wireless network devices to connect to your router. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 6 Status - This LED indicator is blinking green when your router is ready and working successfully. If this LED indicator is solid green on or off, your router is not receiving power or not working properly. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 7: Application Diagram

    Internet. The router is also configured as a Virtual Private Network (VPN) server to allow secure remote access (over the Internet) to work related files and media located at the main office to an employee working from an outside home office location. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 8: Basic Router Setup

    A modem and Internet service to your home, provided by your ISP (modem typically supplied by your ISP) • A router to connect your computers and devices and also connects to the modem. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 9: Router Installation

    DNS Server Address 2: _____. _____._____._____ 3. PPPoE to obtain IP automatically User Name: _________ Password: ________________ 4. PPPoE with a fixed IP address User Name: _________ Password: ________________ IP Address: ____. _____._____._____ (e.g. 215.24.24.129) © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 10 Open your browser (e.g. Internet Explorer, Firefox, Chrome, Safari, or Opera) and type in a URL (e.g. http://trendnet.com) in the address bar. 6. Connect the included power adapter to your router Power Port and then to an 2.
  • Page 11 1. Setting a password prevents other users from accessing the router management page. 2. It is recommended that you enter a new password. If you decide to change the default password, please write down the new password. 3. Password is limited up to 9 characters. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 12 7. Select Auto Detecting WAN Type and the click Next. Note: When configuring your Internet connection settings. It is optional to change your LAN IP network settings. It is recommended to leave this setting at default. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 13 WPA or WPA2, then select WEP. 3. WEP security only supports 802.11b/g speed of up to 54Mbps. 4. Once encryption is enabled on the router, each wireless computer or device must be configured with the same encryption key. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 14 Internet connection settings. 12. Please wait until the router applies the changes and reboots. Note: If you checked the option to run network testing (Internet connection test), you will see the status message below. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 15: Connect Additional Wired Devices To Your Network

    Please ensure that your computer or device network settings (also called TCP/IP settings) are configured to obtain IP address settings automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server address settings automatically. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 16: Wireless Networking And Security

    WPA2: Currently the most secure method of wireless security and required for 802.11n performance. Note: Check the specifications of your wireless network adapters and wireless appliances to verify the highest level of encryption supported. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 17: Secure Your Wireless Network

    Shared Key. Selecting Auto will automatically determine which authentication type to Character set 0-9 & A-F, a-f only alphanumeric (a,b,C,?,*, /,1,2, etc.) use between Open and Shared Key. Key Length 10 or 26 characters 5 or 13 characters © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 18 Select Open in the Authentication drop-down list. Click Save to save the changes. Note: The 802.1x option is only available when using Open Authentication. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 19 When selecting WPA2 security, it is recommended to use AES. It is recommended to configure the specific encryption type instead of choosing TKIP / AES. • Preshared Key – Enter the passphrase. Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.) © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 20: Connect Wireless Devices To Your Router

    RADIUS Shared Key– Enter the shared secret used to authorize your router with your RADIUS server. Click Save to save the changes. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 21: Connect Wireless Devices Using Wps

    4. Next to WPS Status, you will receive a status message indicating the WPS process is activated on your router or you can check that the Wireless LED is blinking green rapidly. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 22: Basic Wireless Settings

    Disable to turn this feature on or off on your router. Note: You may need to initiate the WPS PIN on your wireless device first when using this method. Refer to your wireless device documentation for details on the operation of WPS. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 23 B/G/N Mixed – Select this mode for the best compatibility. This mode allows 802.11b, 11g, and 11n wireless devices to connect your wireless network. B/G Mixed – This mode allows wireless devices to connect to your wireless network at only 802.11b and 802.11g. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 24: Steps To Improve Wireless Connectivity

    2.4GHz frequency can potentially drop the wireless signal. 7. Although the phone may not be in use, the base can still transmit wireless signal. Move the phone’s base station as far away as possible from your wireless devices. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 25: Advanced Wireless Settings

    AP. then next to Wireless Operation Mode, and click on Multiple SSID. • Wireless Operation Mode – Displays the wireless mode the router is operating. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 26: Wireless Scheduling

    APs. To check connectivity, using a wireless device, connect to these virtual APs using the wireless security types you have configured. 3. Click Save to save the changes. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 27: Wireless Bridging Using Wds (Wireless Distribution System)

    Note: If you are already using or planning to use WPA or WPA2 wireless security, this must be the same SSID as the other TEW-659BRV routers you are bridging. If wireless security is disabled or using WEP, the SSID can be different on each router.
  • Page 28 TRENDnet User’s Guide 4. Click the Channel drop-down list and select a specific wireless channel. For additional TEW-659BRV routers, make sure to disable the DHCP server first on all Note: The wireless channel must be the same on all WDS devices.

  • Page 29: Virtual Private Networking (Vpn)

    Important Note: For any tunneling or VPN method used, to avoid IP address conflict and to ensure connectivity, it is required that each end (LAN IP network or single client) of the VPN tunnel is configured with a different IP network or subnet. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 30: Ipsec (Internet Protocol Security)

    VPN Router A LAN IP Settings: 192.168.10.1 / 255.255.255.0 VPN Router B LAN IP Settings: 192.168.100.1 / 255.255.255.0 5. Next to Tunnel Name, enter the tunnel name in the field. (e.g. Tunnel 1) © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 31 (e.g. 10.10.10.20) Note: If the remote router is using dynamic DNS, you can enter domain for the remote gateway instead of the WAN IP address. Based on the example, the network settings will be the following: © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 32 VPN Router A Tunnel Status 5. Next to Tunnel Name, enter the tunnel name in the field. (e.g. Tunnel 1) VPN Router B Configuration 6. Enter the network settings for the IPsec Site-to-Site VPN tunnel. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 33 Note: The preshared key entered must be the same as the preshared key configured in VPN Router A. Note: If you would like to discard the changes, click Undo before you click Save. Note: The preshared key can consist of alphanumeric characters (a,b,C,?,*, /,1,2, etc.) © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 34: Client-Server Vpn (Server Mode)

    VPN endpoints is behind a router with NAT enabled, enable NAT-T (NAT Traversal) to establish VPN connections through devices with NAT enabled. If the router with NAT enabled does not support IPsec VPN pass through, ports © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 35 Note: The preshared key can consist of alphanumeric characters (a,b,C,?,*, /,1,2, etc.) 9. Click the PFS Group drop-down list, and select Same as Phase 1. 10. Next to Dead Peer Detection (DPD), check the Enable option. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 36: Pptp (Point-To-Point Tunneling Protocol)

    Internet through your router and make note of the WAN (Internet) IP assigned to your routers under the Status page. See page 73 for checking the status page. Example: VPN Router A WAN (Internet) IP Address: 10.10.10.10 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 37 When a PPTP VPN client is connected, they will be listed under Connection Status. You 6. Next to Authentication Protocol, check MS_CHAP and MS_CHAPv2. can click Disconnect to disconnect the PPTP VPN client. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 38: Client-Server Vpn (Client Mode)

    See page 53 for changing the LAN IP address. Example: VPN Router A LAN IP Settings: 192.168.10.1 / 255.255.255.0 VPN Router B LAN IP Settings: 192.168.100.1 / 255.255.255.0 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 39 9. Under User Accounts next to ID 1, enter the User Name and Password used by PPTP VPN clients to authenticate. Note: The same account can be used by multiple PPTP VPN clients. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 40 On demand – (Recommended) This mode will connect only when the traffic is sent through VPN tunnel and disconnect automatically after the Maximum Idle Time specified is reached. Auto – This mode will keep the tunnel always established. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 41: L2Tp (Layer 2 Tunneling Protocol)

    Internet through your router and make note of the WAN (Internet) IP assigned to your routers under the Status page. See page 73 for checking the status page. Example: VPN Router A WAN (Internet) IP Address: 10.10.10.10 © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 42: Client-Server Vpn (Client Mode)

    See page 53 for changing the LAN IP address. can click Disconnect to disconnect the L2TP VPN client. Example: VPN Router A LAN IP Settings: 192.168.10.1 / 255.255.255.0 VPN Router B LAN IP Settings: 192.168.100.1 / 255.255.255.0 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 43 Note: If you would like to discard the changes, click Undo before you click Save. Clicking 5. Enter the IP address range to assign to L2TP VPN clients. Refresh will reload the page. Clicking L2TP Client will bring you to the L2TP Client mode configuration page. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 44 Note: If you changed router LAN IP address, you will need to log into the remote router MPPE (Microsoft Point-to-Point Encryption) – This will enable MPPE if using the new IP address instead of the default 192.168.10.1. required by the PPTP server. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 45: Gre (Generic Routing Encapsulation)Tunneling

    See page 53 for changing the LAN IP address. You can also click Disconnect to disconnect the L2TP VPN client. Example: Router A LAN IP Settings: 192.168.10.1 / 255.255.255.0 Router B LAN IP Settings: 192.168.100.1 / 255.255.255.0 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 46 Router B. The preshared key can consist of up to five Note: If you changed router LAN IP address, you will need to log into the remote router alphanumeric characters (a,b,C,?,*, /,1,2, etc.) using the new IP address instead of the default 192.168.10.1. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 47 4. Click Save at the bottom of the page to save the changes. Note: If you would like to discard the changes, click Undo before you click Save. If you are prompted to reboot, reboot the device to apply the changes. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 48: Access Control Filters

    ID drop-down list to select which entry to copy the selected DHCP client information and click Copy To. You can choose a DHCP client from the drop down list or you can manually enter the MAC/IP address information. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 49: Url Filters

    Note: If you would like to discard the changes, click Undo before you click Save. You may want to allow or block computers or devices on your network access to specific websites (e.g. www.trendnet.com, etc.), also called domains or URLs (Uniform Resource Locators).

  • Page 50: Keyword Blocking

    • Select Deny all to pass except those match the following rules to deny all traffic and allow only the filter specified in the list. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 51 Internet to apply the filter. (e.g. 192.168.10.101) Note: Typically, you can specify 0.0.0.0 for any source IP address located on the Internet or enter the specific IP address. (e.g. 10.10.10.200) © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 52 To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. Clicking MAC Level will bring you to the MAC Control configuration page. See MAC Control section. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 53: Advanced Router Setup

    Note: If you would like to discard the changes, click Undo before you click Save. Note: If you change the router login password, you will need to access the router management page using the new password instead of the default password “admin”. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 54: Set Your Router Date And Time

    Note: If you do not choose Manual or Auto, choose one of the predefined time server is the list. Next to Daylight Saving, check the Enable option and configure Start and End of your daylight savings duration. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 55: Manually Configure Your Internet Connection

    Note: If you are unsure which Internet connection type you are using, please contact 6. To save changes, click Save at the bottom of the page. your ISP (Internet Service Provider). Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 56: Change Your Router Ip Address

    (e.g. 192.168.100.1) 2. Click on Configuration at the top of the page, click on Basic Setting, and click on DHCP • Subnet Mask – Enter the new router subnet mask. Server. (e.g. 255.255.255.0) © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 57 4. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 58: Set Up Dhcp Reservation

    • Delete – Deletes the selected DHCP client device from the DHCP Clients List down menu and select the ID you would like to assign the DHCP client and click table. Copy to. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 59: Enable/Disable Upnp On Your Router

    Click Save at the bottom of the page to save the changes. Note: If you would like to discard the changes, click Undo before you click Save. If you click Back, this will return you to the main DHCP Server page. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 60: Allow/Deny Vpn Connections Through Your Router

    Note: If you would like to discard the changes, click Undo before you click Save. 4. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 61: Enable/Disable Dos (Denial Of Service) Prevention

    Note: If you would like to discard the changes, click Undo before you click Save. 4. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 62: Identify Your Network On The Internet

    Note: If you would like to discard the changes, click Undo before you click Save. 4. Next to DDNS, click Enable. 5. In the Provider drop-down list and select the provider for DDNS service you registered. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 63: Allow Remote Access To Your Router Management Page

    For example, if you are specifying a single IP address, use 32 which is equivalent to a subnet mask of 255.255.255.255 and specifies a single IP address. Note: It is recommended to leave this setting as 0, to allow remote access from anywhere on the Internet. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 64: Open A Device On Your Network To The Internet

    Internet and click Enabled. address (e.g. 192.168.10.251) to map and check Enable. 6. To save changes, click Save at the bottom of the page. 6. To save changes, click Save at the bottom of the page. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 65: Virtual Server

    An example would be forwarding a port to an network/IP 192.168.10.101). camera (typically on TRENDnet IP cameras use HTTP TCP port 80 for remote access web requests) on your network for to allow remote access to it.

  • Page 66: Special Applications

    6. Under Server IP, enter the IP address assigned to the camera. (e.g. 192.168.10.101) 7. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 67: Prioritize Traffic Using Qos (Quality Of Service)

    Internet speed tests available on the Internet to determine the estimated value. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 68: Create Schedules

    To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. 3. Next to Schedule, check the Enable option. 4. Click Save at the bottom of the page. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 69: Add Static Routes To Your Router

    9. Apply the schedule to one of the applicable features (Wireless, Virtual Server, Packet Filters, or QoS) in the drop-down list option Use Rule#. Note: The feature will be activated during the time period specified in the schedule and deactivated during the time period not specified. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 70: Enable Dynamic Routing On Your Router

    RIP version 2 protocol. 4. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 71: Enable Route Mode On Your Router

    4. Next to NAT Disable, check the Enable option. 5. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 72: Router Maintenance & Monitoring

    Front Panel Button and LEDs Channel Auto Channel • Router Management Page Configuration > Toolbox > Reset to Default 1. Log into your router management page (see “Access your router management page” page 50). © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 73: Backup And Restore Your Router Configuration Settings

    4. Save the configuration file to location on your computer. 5. Select the router configuration file to restore and click Upgrade. (Default Filename: cfg.bin). If prompted, click Yes or OK. 6. Wait for the router to restore settings. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 74: Upgrade Your Router Firmware

    TRENDnet may periodically release firmware upgrades that may add features or fix Firmware/Restore Setting. problems associated with your TRENDnet router model and version. To check if there is Note: This page also displays the current firmware version of your router.

  • Page 75: Restart Your Router

    Wait for your router Status light to begin flashing. 3. Next to Domain Name or IP address for Ping Test, enter in the IP address (e.g. 192.168.10.101) or host name (e.g. www.trendnet.com) to test and click Ping. • Router Management Page – This is also known as a soft reboot or restart.

  • Page 76: Check The Router Status Information

    Connection Time – Displays the current WAN (Internet) connection status when using other Internet connection types such as PPPoE. Note: Other Internet connection types such as PPPoE will and the mode set will provide the option to Connect and Disconnect. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 77 > DHCP Server > Clients List). See “Set up the DHCP server on you router” section. Current Sessions Status > NAT Status The router will also display the current TCP/UDP sessions. To view the current sessions, click NAT Status. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 78: View Your Router Log

    Page: (Active Session Number: ) - Displays the current session page you are viewing and number of active sessions. 2. Click on Configuration at the top of the page, click on Toolbox, and click on System Information. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 79: Configure Your Router Log

    1. Log into your router management page (see “Access your router management page” number of logs. page 50). 2. Click on Configuration at the top of the page, click on Advanced Setting, and click on System Log. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 80 SMTP Server : port – Enter the IP address (e.g. 10.10.10.10) or domain name Clicking View Log will bring you to log page (Configuration > Toolbox > System (e.g. mail.trendnet.com) of your e-mail server. Enter the port used by your e- Information). See the “View your router log” section.

  • Page 81: Enable Snmp On Your Router

    Remote SNMP access. 4. To save changes, click Save at the bottom of the page. Note: If you would like to discard the changes, click Undo before you click Save. © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 82: Router Management Page Structure

    Forwarding Rules Virtual Server • Toolbox Special Application System Info Firmware/Restore Setting Upgrade Firmware  • Security Restore Configuration  Setting Overview Backup Setting Packet Filters Reset to Default URL Filters Reboot Keyword Blocking © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 83: Technical Specifications

    Wake-on-LAN (WoL) data throughput and coverage will vary depending on interference, network traffic, building materials and other conditions. LED Indicator Status, LAN1~LAN4, WAN (Internet), WLAN/WPS Power Adapter 12V DC, 1A external power adapter © Copyright 2012 TRENDnet. All Rights Reserved.

  • Page 84: Troubleshooting

    5. Please see “Steps to improve wireless connectivity” on page 21 if you continue to have wireless connectivity problems. 4. Press on the factory reset button on the front panel for 20 seconds, the release. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 85 Click Internet Protocol Version (TCP/IPv4) and then click Properties. icon and click Details. d. Then click Obtain an IP address automatically and click OK. Windows XP Windows XP a. Go into the Control Panel, double-click the Network Connections icon © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 86 3. You may be prompted to enter a security key in order to connect to the network. 3. On the Ethernet tab, the Ethernet ID is your MAC Address. 4. Enter in the security key corresponding to the wireless network, and click Connect. MAC OS 10.4 © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 87 Checking this option will change negotiation to Aggressive. Aggressive mode problems between the VPN endpoints. will increase the speed of establishing a connection between the VPN endpoints by sending fewer messages than in Main mode. The disadvantage of © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 88 (e.g. trendnet.com) Forward Secrecy) and DH (Diffie-Hellman) groups between the VPN endpoints. User@FQDN – Enter an e-mail address. (e.g. site1@trendnet.com) Note: It is recommended only to leave Aggressive mode disbled, unless you are Key ID – Create and enter a password or key. (e.g. 1234567890)
  • Page 89 IKE proposal only. To configure the DH Group for the IPsec proposal, configure PFS (Perfect Forward Secrecy) Group 1 – DH group 1 (768-bit) Group 2 – DH group 2 (1024-bit) Group 5 – DH group 5 (1536-bit) © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 90 NetBIOS (Network Basic Input/Output System) over GRE – Checking the Enable option allows computer and network devices to communicate using NetBIOS computer or host names instead of IP addresses over the GRE tunnel. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 91 IP configuration or firewall/security settings of the remote computer or device you are trying to communicate. 5. In the window, click on Use my Internet Connection (VPN). © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 92 IP configuration or firewall/security settings of the remote computer or device you are trying to communicate. 6. Next to Internet address, enter the remote router WAN (Internet) IP address and then click Next. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 93 7. In the Connection Name window, click Next. 8. Next to Host name or IP address, enter the remote router WAN (Internet) IP address and then click Next. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 94 In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services. RoHS This product is RoHS compliant. © Copyright 2012 TRENDnet. All Rights Reserved.
  • Page 95 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių Šiuo TRENDnet deklaruoja, kad šis TEW-659BRV atitinka esminius Česky TRENDnet tímto prohlašuje, že tento TEW-659BRV je ve shodě se [Lithuanian] reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. [Czech] základními požadavky a dalšími příslušnými ustanoveními...
  • Page 96 Download section limited to, duty, tax, and other fees. and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS the developers.

This manual is also suitable for:

Tew-659brn

Table of Contents