Table of Contents
Advertisement
3.1.2 Ad-Hoc Mode
Ad-Hoc is a client setting that provides independent peer-to-peer connectivity in a
wireless LAN. With this mode, devices communicate directly with each other. A good
example is the communication between two game consoles. See diagram below.
Game Console
1
Adjust the switch to Client mode. See 1.4.1 Setting the Operating Mode on
page 10.
2
Connect one end of the RJ-45 cable to the travel router and the other end to
the game console or other devices.
3
Connect the power adapter to the travel router and plug to an outlet or power
strip. Wait for the travel router to boot.
Wireless Travel Router
Wireless Travel Router
Network Diagram
3. CLIENT MODE
Game Console
The following LED
indicators should be lit...
√
Power LED (solid)
√
LAN LED (solid)
√
WLAN LED (flashing green)
1
1
Hide quick links:
Advertisement
Table of Contents
