Pppoe - TRENDnet TEW-654TR User Manual

MTU
Adjust the MTU (Maximum Transmission Unit) for optimal performance with your ISP.
The default value is 1400.
MAC Address
Enter the MAC address of the computer that was last connected to a modem. To
enter the MAC address of your current computer, click Clone MAC Address.
Once configuration is complete, click Apply to save and apply settings, or click
Cancel to cancel changes. The travel router will restart for new settings to take effect.

PPPoE

Select PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE
connection. Your ISP will provided you with a user name and password.
Address Mode
Select Dynamic IP (default) or Static
IP if your ISP provided you with the IP
address, subnet mask, and DNS server
addresses.
IP Address
Enter the IP address provided by your
ISP. This field is only available when
Access Mode is set to Static IP.
Service Name
Enter the ISP's service name (optional).
User Name
Enter the user name provided by your
ISP.
Password
Enter the password.
Primary / Secondary DNS
Enter the DNS server addresses provided by your ISP.
Auto-reconnect
Select reconnect option: Always-on, Connect-on Demand, and Manual .
Idle Time Out
Enter the time wherein the travel router will cut off the Internet connection after the
specified period of inactivity (in minutes). This field is disabled when Auto-reconnect
is Always-on.
MTU
Adjust the MTU (Maximum Transmission Unit) for optimal performance with your ISP.
The default value is 1492.
Wireless Travel Router Wireless Travel Router
4. ROUTER MODE